Hytera X1P UL913
Hytera 超薄型鋁合金防爆防水型無線電對講機
| General | ||
| Frequency Range | UHF1: 400-470MHz; UHF2:450-520MHz; UHF5: 806-941MHz*; VHF: 136-174MHz | |
| Channel Capacity | 1024 | |
| Channel Spacing | 25/20/12.5KHz | |
| Operating Voltage | 7.4V (rated) | |
|
Battery (5-5-90 Duty Cycle, High TX Power) |
1100mAh Li-ion battery/1400mAh Li-ion battery/1800mAh Li-ion battery | |
|
Battery Life (5-5-90 Duty Cycle, High TX Power) |
Digital: about 13 Hours (1400mAh Li-ion battery) | |
| Frequency Stability | ±1.5ppm | |
| Antenna Impedance | 50Ω | |
|
Dimensions (H×W×D) (with standard battery, without antenna)） |
119.5 X 57 X 23mm (1400mAh Li-ion battery) | |
| Weight (with antenna & standard battery) | about 280g (1400mAh Li-ion battery) | |
| Transmitter | ||
| RF Power Output |
VHF High Power: 5W VHF Low Power: 1W UHF1/UHF2/UHF3 High Power: 4W, UHF1/UHF2/UHF3/UH5 Low Power: 1W UHF5 High Power: 3W (806-870MHz), 2.5W |
|
| FM Modulation |
11K0F3E @ 12.5KHz 14K0F3E @ 20KHz 16K0F3E @ 25KHz |
|
| 4FSK Digital Modulation |
12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW |
|
| Conducted/Radiated Emission |
-36dBm<1GHz -30dBm>1GHz |
|
| Modulation Limiting |
±2.5KHz @ 12.5KHz ±4.0KHz @ 20KHz ±5.0KHz @ 25KHz |
|
| FM Noise |
40dB @ 12.5KHz 43dB @ 20KHz 45dB @ 25KHz |
|
| Adjacent Channel Power | 60dB @ 12.5KHz; 70dB @ 20/25KHz | |
| Audio Response | +1 ~ -3dB | |
| Audio Distortion | ≤3% | |
| Digital Vocoder Type | AMBE++ or SELP | |
| Digital Protocol | ETSI-TS102 361-1, 2&3 | |
| Receiver | ||
| Sensitivity | Analog |
0.3μV (12dB SINAD) 0.22μV (Typical) (12dB SINAD) 0.4μV (20dB SINAD) |
| Digital | 0.3μV /BER5% | |
|
Selectivity TIA-603 ETSI |
60dB @ 12.5KHz / 70dB @ 20&25KHz 60dB @ 12.5KHz / 70dB @ 20&25KHz |
|
|
Intermodulation TIA-603 ETSI |
70dB @ 12.5/20/25KHz 65dB @ 12.5/20/25KHz |
|
|
Spurious Response Rejection TIA-603 ETSI |
70dB @ 12.5/20/25KHz 70dB @ 12.5/20/25KHz |
|
| S/N |
40dB @ 12.5KHz 43dB @ 20KHz 45dB @ 25KHz |
|
| Rated Audio Power Output | 0.5W | |
| Rated Audio Distortion | ≤3% | |
| Audio Response | +1 ~ -3dB | |
| Conducted Spurious Emission | < -57dBm | |
| Environmental Specifications | ||
| ESD |
IEC 61000-4-2 (level 4) ±8kV (contact) ±15kV (air) |
|
| American Military Standard | MIL-STD-810 C/D/E/F/G | |
| Dust & Water Intrusion | IP67 Standard | |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard | |
| Shock & Vibration | Per MIL-STD-810 C/D/E/F/G Standard | |
